Manual Cylinder Manifolds
Designed for use with gas control systems and gas distribution systems using both high or low cylinder pressure, The manual gas manifold provides a simple solution for managing equal banks of gas cylinders.
Available in Tech-Master Brass (n4.5), Spec-Master Nickel Plated Brass (n6) or Chem-Master Stainless Steel (n6) the manual cylinder manifold is supplied with a pressure reduction package with either dual stage or single stage primary pressure regulators.
- TECH MASTER GPM4040 SERIES
4.5 Purity Two Stage Brass Barstock Diaphragm BS EN ISO 7291 Manual Change Gas Control Panel
- SPEC MASTER HPM6040 SERIES
6.0 Purity Two Stage Nickel Plated Brass Barstock Diaphragm Manual Change Gas Control Panel
- CHEM MASTER SGM6040 SERIES
6.0 Purity Two Stage Stainless Steel Diaphragm Manual Change Gas Control Panel
Type and Regulator:
Single or dual stage
Spec-Master: Nickel plated brass
Chem-Master: 316L Stainless steel
Tech: Polychloroprene (Neoprene)
Spec/Chem: 316L Stainless steel
Chem: Stainless steel
Piston Seal: Tech/Spec/Chem: FKM
Filter: Sintered 316L Stainless steel
Maximum 60 or 300 bar
Tech/Spec/Chem-Master Diaphragm: 0-3.5, 0-6 or 0-10 BAR
Tech/Spec/Chem Master Piston: 0-20/50/100/200 BAR
Helium Leak Integrity:
1 x 10-9 mbar I/s
Tech-Master: 4.5 (99.995%)
Spec/Chem Master: 6.0 (99.9999%)
Temperature: -20c to +60c
Have a Question?
Request a quote
Request a quote today for our speciality gas products for your specific needs. We provide the highest quality products, application expertise & exceptional customer support.