BTS SERIES: Automated Test Station for Non-Refillable Cylinders
The Bump Test Station is an easy to use device for the verification of sensor response of your multi gas or personal gas detectors. This simple bump test can be performed in less than 60 seconds and will give you the piece of mind that your instrument is responding to gas properly, prior to entering a confined space or dangerous gas area in a plant.
- Can be used with any make/model of instrument
- Can use any concentration of gas or cylinder size
- Green status light and flow meter varify gas flow
- Automatic shut-off
- One, Two or Three Channel Systems
- Push button operation for ease of use
- Lockable Nema 4X Cabinet
- Adjustable Flow timer (1-60 sec)
The Bump Test Station is a perfect compliment to any company’s calibration or maintenance schedule and can be customized to fit your gas detection program. Bump Test Station is not intended to and/or should not be used to replace periodic instrument manufacturer’s recommended gas calibration interval.
Single Channel ~ CACBTS101
Dual Channel ~ CACBTS201
Three Channel ~ CACBTS301
Power: 220 volt power, 56″ cord supplied with unit
Enclosure: Wall mounted, NEMA 4X
Single Channel – 22″H x 11″W x 6.25″D
Dual Channel – 22″H x 15″W x 7″D
Flow Rate: 0.3 – 1.5LPM standard, others available
Number of test @ 30 seconds: 224 per 60L ; 412 per 103L ; 448 per 112L
Compatibility: Any diffusion or sample draw instrument, may require instrument manufacturer’s calibration adaptor.
Cylinder size: 34L ; 65L ; 103L, 112L
Test time: 1-60 seconds, 30 second standard with automatic shut off and reset switch
Have a Question?
Request a quote
Request a quote today for our speciality gas products for your specific needs. We provide the highest quality products, application expertise & exceptional customer support.